Penerapan Manajemen Risiko Berbasis ISO 14971 pada Unit Elektromedis di Laboratorium Klinik X
DOI:
https://doi.org/10.31004/t1zkym63Keywords:
Analisis risiko, ISO 14971, Elektromedis, K3, Laboratorium klinikAbstract
Kegiatan ini bertujuan memperkuat sistem manajemen risiko elektromedis melalui implementasi ISO 14971 di Laboratorium Klinik X Pekanbaru. Ruang elektromedis memiliki peran strategis dalam menjamin keselamatan pasien dan tenaga kesehatan karena berkaitan langsung dengan penggunaan peralatan medis berbasis listrik yang berisiko tinggi. Namun, penerapan manajemen risiko pada unit elektromedis masih belum optimal sehingga berpotensi meningkatkan risiko operasional dan gangguan mutu pelayanan. Kegiatan pengabdian dilaksanakan pada 13–30 Oktober 2025 melalui observasi lapangan, wawancara dengan koordinator elektromedis, teknisi elektromedis, staf laboratorium, dan petugas K3, serta telaah dokumen pendukung seperti SOP, laporan kalibrasi, dan catatan pemeliharaan alat. Implementasi kegiatan meliputi identifikasi risiko peralatan elektromedis berbasis ISO 14971, penyusunan form risk assessment, penguatan SOP manajemen risiko, serta edukasi dan pelatihan teknisi terkait identifikasi dan pengendalian risiko alat elektromedis. Analisis prioritas masalah dilakukan menggunakan metode fishbone dan USG untuk menentukan risiko utama yang memerlukan tindak lanjut. Hasil kegiatan menunjukkan bahwa implementasi manajemen risiko berbasis ISO 14971 mampu meningkatkan pemahaman teknisi mengenai identifikasi bahaya dan pengendalian risiko, memperkuat dokumentasi risk assessment, serta mendorong pemantauan risiko yang lebih sistematis pada unit elektromedis. Kegiatan ini menegaskan bahwa penerapan manajemen risiko elektromedis secara terstruktur penting untuk meningkatkan keselamatan kerja, keandalan alat elektromedis, dan mutu pelayanan laboratorium klinik.
Downloads
References
Adekoya, J. (2025). Integrating quality and safety management in clinical laboratory practices. International Journal of Health Systems, 9(1), 55–64.
Adelodun, A., & Omotayo, O. (2024). Strategies for optimizing the management of medical equipment in large healthcare institutions. International Journal of Healthcare Engineering.
Alazmi, A., Alenezi, A., & Rahman, M. (2024). Understanding the role of clinical laboratories in diagnostic medicine. Journal of Laboratory Medicine and Health Science, 12(2), 101–110.
Alenazi, M., Ahmed, R., & Hussein, S. (2024). Laboratory biosafety and biosecurity practices in healthcare institutions: A global perspective. International Journal of Occupational Safety, 18(3), 245–257.
Alizadeh, M. (2023). Fire risk reduction through education and training in healthcare facilities. Journal of Safety Science and Resilience, 7(2), 45–53.
Almazrou, S. H., Almutairi, A., & Aldossari, M. (2023). Assessing barriers and facilitators for implementing clinical risk programs in hospital settings. International Journal of Health Systems Research, 11(2), 75–88.
Atiyah, N. (2023). Implementation of occupational safety for productive and pollution-free workplaces. International Journal of Industrial Health, 9(1), 112–120.
Chaudhry, N., Malik, R., & Qureshi, S. (2023). Quality management systems in clinical laboratories: Ensuring accuracy and safety. Journal of Health Technology and Management, 8(4), 312–324.
Cheng, W., Hsu, T., & Lin, C. (2020). Risk-based maintenance and documentation framework for medical equipment in hospitals. Journal of Clinical Engineering, 45(3), 121–130.
Crunden, E. A., Reeve, J., & Stevens, T. (2022). Barriers and facilitators to reporting medical device-related incidents: Knowledge, workload, and perceptions in clinical engineering. Biomedical Instrumentation & Technology, 56(4), 201–212.
De Silva, P. (2025). Fire risk assessment and mitigation in urban building environments. Building Safety Review, 15(3), 87–96.
Fiorentino, G., Rossi, D., & Montani, F. (2023). Enhancing traceability and documentation in medical device maintenance systems. Biomedical Instrumentation & Technology, 57(4), 251–260.
Freyer, J., Tifft, C., & Nauman, E. (2024). Consideration of cybersecurity risks in medical device risk management: Integrating ISO 14971 principles. Journal of Medical Internet Research, 26(3), 455–469. https://doi.org/10.2196/jmir.47218
Gorczyca, A., Zender, R., & Schulz, S. (2024). A farewell to harms: Risk management for medical devices via the Riskman ontology and shapes. arXiv Preprint.
Hunte, C., Neil, M., & Fenton, N. (2022). A hybrid Bayesian network for medical device risk assessment and management. arXiv Preprint.
Ispas, L., Popescu, C., & Muntean, D. (2023). Risk-based approach in implementing integrated management systems for healthcare facilities. Healthcare, 11(8), 992–1003.
Jahja, A. (2025). Evaluation and optimization of occupational safety programs in chemical and microbiology laboratories. Journal of Health and Environment, 8(2), 56–65.
Kaban, R., Sembiring, D., & Lubis, H. (2024). Implementation of HIRADC-based risk management in chemical and physical laboratories. Indonesian Journal of Occupational Health and Safety, 5(1), 27–39.
Kheir, O., El-Khatib, A., & Nassar, R. (2022). Risk identification and analysis in the development and maintenance of medical devices: Implementation capacity challenges. Journal of Clinical Engineering, 47(3), 157–166.
Luschi, A., Rossi, G., & Colombo, F. (2024). Empowering clinical engineering through risk-based maintenance planning. Sensors, 24(6), 2873. https://doi.org/10.3390/s24062873
Luthfiansyah, F., Prasetyo, A., & Raharjo, T. (2024). A systematic review of risk management tools and techniques in software projects. The Indonesian Journal of Computer Science, 13(1).
Martínez-González, J., & Pérez, R. (2021). Digital maintenance logs to improve safety and reliability of biomedical devices. Healthcare Technology Letters, 8(5), 130–138.
Miky, Y., Issa, U. H., Faisal, K., Kordi, M. N., & Alshammari, K. F. (2024). Developing and implementing a risk analysis-based model for effective management of protected areas. World, 5(4), 1285–1306.
Mishra, P., & Shukla, P. (2020). Latest risk management guideline (ISO 14971:2019) and environmental aspects of medical devices. International Journal of Drug Regulatory Affairs, 8(2), 45–52.
Mursid, A., & Herawati, R. (2023). Risk mitigation analysis and safety equipment for work accident prevention. Jurnal Soshum Arrus, 3(2).
Nuriah, R., & Rudyarti, E. (2024). Supporting occupational health and safety risk assessment skills: A case study of five companies. Journal of Public Health and Safety.
Park, S. (2025). Evaluation of medical device aging and replacement using risk-based planning. Journal of Biomedical Engineering and Technology, 13(1), 12–21. https://doi.org/10.1016/j.jbet.2025.02.003
Ramasamy, S., & Johnson, M. (2022). Documentation quality and risk control in hospital biomedical equipment management. International Journal of Healthcare Engineering, 2022, 1–10.
Risk management for medical devices: Practical implementation of ISO 14971. (2023). International Journal of Healthcare Technology Management, 19(2), 77–89. https://doi.org/10.1504/IJHTM.2023.129847
Siregar, H., & Mudayana, A. (2024). Analysis of occupational safety and health risks in private hospital laboratories. Indonesian Journal of Health Research, 3(2).
Soetjiatie, L., et al. (2024). Role of electromedical personnel in ensuring the availability of electromedical devices in hospitals. Rawal Medical Journal.
Van Vroonhoven, J. (2022). Risk management for medical devices and the new ISO 14971 guidance: Regulatory and supplier perspectives. BSI Journal of Health Technology Standards, 9(1), 33–45.
Van Vroonhoven, R. (2021). Best practices for ISO 14971: Application of risk management to medical devices. British Standards Institution White Paper Series.
Xu, Y., Reniers, G., & Yang, M. (2024). A multidisciplinary review into the evolution of risk concepts and their assessment methods. Processes, 12(11), 2449.
Yamamoto, K., & Lee, H. (2024). Compliance challenges in ISO 14971 and ISO 13485 documentation systems. Journal of Health Technology and Policy, 12(2), 87–99.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Fauziah Arshinta, Ahmad Satria Efendi, Ilham Kurniawan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.












